QuŔ en diuen els usuaris - Escriviu una ressenya
No hem trobat cap ressenya als llocs habituals.
Altres edicions - Mostra-ho tot
Polyphase Electric Currents and Alternate-current Motors
Silvanus Phillips Thompson
Visualitzaciˇ completa - 1902
Polyphase Electric Currents and Alternate-Current Motors
Silvanus Phillips Thompson
Previsualitzaciˇ no disponible - 2016
3-phase Alternate Current angle armature arranged Brown cent circuit closed coils combination common commutator conductors connected consider construction continuous copper core courants Current Motors curve described designed diameter direction disk distribution effect efficiency Elec electric electromotive electromotive-force Elek Engineers equal Experiments fact Ferraris flux force four frequency given gives greater grouping holes horse-power impressed increase induction instant insulated iron joined lamps later lighting load machine magnetic field maximum means measured method motion motor opposite ordinary passing patent period phase placed poles polyphase position pressure produced represent resistance resultant revolving ring rotating rotatory rotor running secondary separate shown in Fig shows similar simple single-phase slip space speed starting stator supplied synchronous taken tending Tesla theory Three-phase torque transformer transmission turns voltage volts winding wires World N.Y. wound Zeitsch
PÓgina 8 - By revolving in a uniform field the electromotive forces set up are proportional to the sine of the angle through which the coil has turned from the position in which it lay across the field. If in this position the flux of magnetic lines through it were N, and the number of spirals in the coil that enclose the N lines be called S, then, as was shown on p.
PÓgina 265 - Explained, with numerous illustrations and Remarks. By JAMES SWINBURNE, late of JW Swan and Co., Paris, late of Brush-Swan Electric Light Company, USA i8mo, cloth, is. 6d. PhilippReis, Inventor of the Telephone: A Biographical Sketch.
PÓgina 86 - ARAGO'S method of producing rotation in a copper disk consists of suspending it by its centre so as to make it lie horizontally above the poles of a horseshoe magnet, and then rotating the magnet about a vertical axis. The rotation of the disk is due to that of the magnetic field in which it is suspended; and we should expect that if a similar motion of the field could be produced by any other means, the result would be a similar motion of the disk. Possibly the rotation of the magnet may be the...
PÓgina 116 - FIG. 108. downward returning currents are led into some path where they will return across a field of opposite polarity from that across which they flowed up. Then they will doubly tend to produce rotation. As a first stage to this, it will obviously be an improvement to ma,ke in the copper cylinder a number of parallel slits, which extend nearly to the ends of the cylinder as in Fig.
PÓgina 99 - ... that is to say, by producing a progressive movement or rotation of their poles or points of greatest magnetic attraction by the alternating currents until they have reached a...
PÓgina 92 - A rotary electric motor consisting of a field-magnet and armature and pairs of current-leading devices — such for instance as contact rings and brushes — the respective pairs being independently connected into the armature winding at alternating points of the same, and arranged for connection FIG. 96. with two independent external circuits.
PÓgina 10 - Cardew voltmeters (Art. 430), and electrostatic voltmeters (Art. 290) do not measure the arithmetical average values of the amperes or volts. The readings of these instruments, if first calibrated by the use of continuous currents, are the square roots of the means of the squares of the values. They measure what are called virtual amperes or virtual volts. The mean which they read (if we assume the currents and voltages to follow the sine law of variation) is equal to 0-707 of the maximum values,...
PÓgina 238 - On the Production of Rotary Magnetic Fields by a Single Alternating Current.
PÓgina 86 - The rotation of the disk is due to that of the magnetic field in which it is suspended; and we should expect that if a similar motion of the field could be produced by any other means, the result would be a similar motion of the disk. Possibly the rotation of the magnet may be the only practicable way of producing a uniform rotation of the field ; but it will be shown in this paper that the disk can be made to rotate by an intermittent rotation of the field effected by means of electromagnets.