The Useful Metals and Their Alloys, Including Mining Ventilation, Mining Jurisprudence, and Metallurgic Chemistry Employed in the Conversion of Iron, Copper, Tin, Zinc, Antimony and Lead Ores; with Their Applications to the Industrial Arts

Houlston and Wright, 1861 - 654 pàgines

Què en diuen els usuaris - Escriviu una ressenya

No hem trobat cap ressenya als llocs habituals.


Altres edicions - Mostra-ho tot

Frases i termes més freqüents

Passatges populars

Pàgina 244 - ... a multiplicity of small furnaces. While the manufacturer has shown himself fully alive to these advantages, he has still been under the necessity of leaving the succeeding operations to be carried out on a scale wholly at variance with the principles he has found so advantageous in the smelting department. It is true that hitherto no better method was known than the puddling process, in which from...
Pàgina 244 - ... times its original length. One of the most important facts connected with the new system of manufacturing malleable iron is that all the iron so produced will be of that quality known as charcoal iron; not that any charcoal is used in its manufacture, but because the whole of the processes following the smelting of it are conducted entirely without contact with, or the use of, any mineral fuel; the iron resulting therefrom will in consequence be perfectly...
Pàgina 446 - It may be said that the pressure or adhesion of the two surfaces of the plates would add to the strength : but this is not found to be the case, to any great extent, as in almost every instance the experiments indicate the resistance to be in the ratio of their sectional area, or nearly so.
Pàgina 334 - ... but I do not claim the use of any such mixture of cast and malleable iron, or malleable iron and carbonaceous matter, as any part of my invention, but only the use of carburet of manganese, in any process for the conversion of iron into cast-steel...
Pàgina 448 - Single-riveted joint . 1000 1021 791 From the above it will be seen that the single-riveted joints have lost one-fifth of the actual strength of the plates, whilst the doubleriveted have retained their resisting powers unimpaired. These are important and convincing proofs of the superior value of the double joint ; and in all cases where strength is required, this description of joint should invariably be used.
Pàgina 239 - ... which always accompanies the boil. The rapid union of carbon and oxygen which thus takes place adds still further to the temperature of the metal, while the diminished quantity of carbon present allows a part of the oxygen to combine with the iron, which undergoes combustion and is converted into an oxide. At the excessive temperature that the metal has now acquired, the oxide as soon as formed undergoes fusion, and forms a powerful solvent of those earthy bases that are associated with the iron...
Pàgina 473 - ... it. In this plan the mould for the face of every casting is formed from the original metal pattern, and the pattern itself is firmly and permanently secured in the plaster bed, so that however thin and delicate it may be, there is no risk of injury to the pattern in moulding any number of castings : as many as 3000 have been cast without injury from a slender ornamental pattern. In forming the...
Pàgina 339 - ... of sparry iron ore) from the impurities with which it was mixed, and also bring down with it a portion of the iron contained in the sparry iron ore, thereby increasing the yield of cast steel by about 6 per cent.
Pàgina 238 - The direct statement is made, that ' the air, dividing into globules, and diffusing itself among the particles of fluid iron, and thus coming in contact at numerous points with the carbon contained in the crude iron, and producing thereby a vivid combustion,' and the same action is implied in other parts of Mr.
Pàgina 448 - ... by machine is considerable, we may fairly assume the following relative strengths as the value of plates with their riveted joints : — Taking the strength of the plate at 100 The strength of the double-riveted joint would then be . . 70 And the strength of the single-riveted joint...

Informació bibliogràfica